Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 151)

Brocade Mobility RFS7000-GR Controller System Reference Guide 137
53-1001944-01
Viewing and configuring switch WLANs
4
Configuring WMM
Use the WMM tab to review a WLAN’s current index (numerical identifier), SSID, description,
current enabled/disabled designation, and Access Category.
To view existing WMM Settings:
1. Select Network > Wireless LANs from the main menu tree.
2. Click the WMM tab.
The WMM tab displays the following information:
Idx Displays the WLANs numerical identifier. This field is displayed in a two part
format. The first number is the WLAN index and the second number is a sub-index
corresponding to the access category. Click the Edit button to modify this property.
SSID Displays the Service Set ID (SSID) associated with each WLAN.
Description Displays a brief description of the WLAN.
WLAN enabled Displays the status of the WLAN. A Green check defines the WLAN as enabled and
a Red "X" means it is disabled. The enable/disable setting can be defined using
the WLAN Configuration screen.
WMM enabled Displays WLAN-WMM status. It can be enabled (for a WLAN) from the WLAN
Configurations Edit screen by selecting the Enable WMM checkbox.
Access Displays the Access Category for the intended radio traffic. Access Categories are
the different WLAN-WMM options available.
The four Access Category types are:
•
Background — Optimized for background traffic
•
Best-effort — Optimized for best effort traffic
•
Video — Optimized for video traffic
•
Voice — Optimized for voice traffic