Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 315)

Brocade Mobility RFS7000-GR Controller System Reference Guide 301
53-1001944-01
Locationing
5
3. Click the Add button..
Configuring SOLE parameters
To configure the switch’s internal SOLE locationing engine:
1. .Services > RTLS from the main menu tree.
2. Select the SOLE tab.
3. Check the Locate All Mobile-Units checkbox to locate all MUs known to the switch across all
WLANs. This will also disable manual entry of MU MAC addresses in the field below.
This takes effect immediately when the box is checked.
4. Enter a value for the MU Locate Interval in seconds. The MU Locate Interval determines how
often the locationing of MUs is updated. The valid range for this is between 5 to 3600 seconds.