Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 169)

Brocade Mobility RFS7000-GR Controller System Reference Guide 155
53-1001944-01
Viewing associated MU details
4
4. Check the Trigger Beacon Request box to enable Radio Resource Management services on
the selected MU.
5. In the Measurement Duration field, enter a time interval between 500-1000(in K-us) to specify
how often the Radio Resource Measurement services will poll the selected MU for traffic
information.
6. Click OK to use the changes to the running configuration and close the dialog.
Configuring Mobile Units
The Mobile Units Configuration screen lets you view MAC Address to MAC Name associations as
well as creating new MAC Address to MAC Name associations.
To configure Mobile Unit settings:
1. Select Network > Mobile Units from the main menu tree.
2. Click the Configuration tab.
3. The MU table displays the following information:
Switch The Switch field displays the IP address of the cluster member associated with
each MU. When clustering is enabled on the switch and Cluster GUI is enabled the
Switch field will be available on the MU Configuration screen. For information on
configuring enabling Cluster GUI, see Managing Clustering Using the Applet.
Station Index The Station Index is a numerical device recognition identifier for a specific MU.