Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 72)

58 Brocade Mobility RFS7000-GR Controller System Reference Guide
53-1001944-01
Viewing switch configurations
3
• server to switch
• local disk to switch
To transfer the contents of a configuration file:
1. Click the Transfer Files button on the bottom of the Configuration screen.
2. Refer to the Source field to define the location and address information for the source config
file.
3. Refer to the Target field to specify the details of the target file.
4. Refer to the Status field for the current state of the requests made from the applet. Requests
are any “SET/GET” operation from the applet. The Status field displays error messages if
something goes wrong in the transaction between the applet and the switch.
5. Click the Transfer button when ready to move the target file to the specified location. Repeat
the process as necessary to move each desired configuration file to the specified location.
From Select the location representing the source file’s current location using the From
drop-down menu. Options include Server, Local Disk and Switch.
File Specify a source file for the file transfer. If the switch is selected, the file used at
startup automatically displays within the File parameter.
Using Refer to the Using drop down-menu to configure whether the log file transfer is
conducted using SFTP transfers require a valid user ID and password.
IP Address Enter the IP Address of the server or system receiving the source configuration.
Ensure the IP address is valid or risk jeopardizing the success of the file transfer.
User ID Enter the User ID credentials required to transfer the configuration file from a SFTP
server.
Password Enter the Password required to send the configuration file from an SFTP server.
Path Specify an appropriate Path name to the target directory on the local system disk
or server. The Target options are different depending on the target selected.
To Use the To drop-down menu to define the location of the configuration file. Options
include the switch (default location), external server or local disk.
File Use the File field to specify a target file for the file transfer. Use the File Browser
icon to search attached files systems for target file location.