Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 145)

Brocade Mobility RFS7000-GR Controller System Reference Guide 131
53-1001944-01
Viewing and configuring switch WLANs
4
1. Select Network > Wireless LANs from the main menu tree.
2. Click the Statistics tab.
3. Refer to the following details displayed within the table:
Last 30s Click the Last 30s radio button to display statistics for the WLAN over the last 30
seconds. This option is helpful when troubleshooting issues as they actually occur.
Last Hr Click the Last Hr radio button to displays statistics for the WLAN over the last 1
hour. This metric is helpful in baselining events over a one hour interval.
Index The Idx (or index) is a numerical identifier used to differentiate the WLAN from
other WLANs that may have similar characteristics.
ESSID The SSID is the Service Set ID (SSID) for the selected WLAN.
Descr The Descr item contains a brief description of the WLAN. Use the description
(along with the index) to differentiate the WLAN from others with similar attributes.
VLAN The VLAN parameter displays the name of the VLAN the WLAN is associated with.
MUs Lists the number of MUs associated with the WLAN.
Throughput Mbps Throughput Mbps is the average throughput in Mbps on the selected WLAN. The
Rx value is the average throughput in Mbps for packets received on the selected
WLAN. The Tx value is the average throughput for packets sent on the selected
WLAN.
Avg BPS Displays the average bit speed in Mbps for the selected WLAN. This includes all
packets sent and received.