Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 55)

Brocade Mobility RFS7000-GR Controller System Reference Guide 41
53-1001944-01
Viewing the switch interface
3
4. Click the Restart button to reboot the switch. The switch itself does not include a hardware
reset feature:
CAUTION
When rebooting the switch, the RADIUS Server will also be restarted regardless of its state before
the reboot.
5. Click the Shutdown button to shutdown and power off the switch.
NOTE
On the Brocade Mobility RFS7000-GR Controller, the shutdown command will shutdown the switch
but the fans on the switch will remain on.
6. Click the Show Dashboard button to display a screen with important indicators of switch health
and status. For more information, see “Switch dashboard details” on page 41. Referencing the
Details screen is recommended before new configurations are employed that utilize increased
switch bandwidth.
7. Click the Revert button to undo any changes. Click the Revert button before selecting the Apply
button for any changes.
8. Click the Apply button to save the updates (to the Time Zone or Country parameters
specifically).
Switch dashboard details
The Brocade Mobility RFS7000-GR Controller contains a dashboard which represents a high-level
graphical overview of central switch processes and hardware. When logging into the switch, the
dashboard should be the first place you go to assess overall switch performance and any potential
performance issues.
Uptime Displays the current operational time for the device name defined within the
System Name field. Uptime is the cumulative time since the switch was last
rebooted or lost power.
Firmware Displays the current firmware version running on the switch. This version should be
periodically compared to the most recent version available on the Brocade Web
site, as versions with increased functionality are periodically released.
AP License Count Displays the number of Access Port licenses currently available for the switch. This
value represents the maximum number of Access Ports the switch is licensed to
adopt.
AAP License Count The AAP License Count value displays the number of Adaptive AP licenses installed
on this member.
Date (MM/DD/YYYY) Displays the day, month and year currently used with the switch.
Time Displays the time of day used by the switch.
Time Zone Use the drop-down menu to specify the time zone used with the switch. Adjusting
the time zone will in turn, cause an adjustment to the time displayed.
Country Use the drop-down menu to specify the correct country of operation. Selecting the
country incorrectly could render your switch as operating illegally.