Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) - Manual (Page 172)

158 Brocade Mobility RFS7000-GR Controller System Reference Guide
53-1001944-01
Viewing associated MU details
4
6. Click the Details button to launch a screen with additional information about the selected MU.
For more information, see “Viewing MU statistics in detail” on page 158.
7. Click the Graph button to launch a graph with pictorial information about the selected MU in a
graphical format. For more information, see “View a MU statistics graph” on page 160.
8. Click the Export button to export the content of the table to a Comma Separated Values file
(CSV).
Viewing MU statistics in detail
The MU Statistics Details screen displays additional device address and performance information
for the selected MU. Use the WMM information to assess if poor MU performance can be attributed
to an inaccurate WMM setting for the type of data transmitted. To view the MU Statistics details:
1. Select a Network > Mobile Units from the main menu tree.
2. Click the Statistics tab.
3. Select a MU from the table displayed in the Statistics screen and click the Details button.
Throughput Mbps Displays the average throughput in Mbps between the selected MU and the Access
Port. The Rx column displays the average throughput in Mbps for packets received
on the selected MU from the Access Port. The Tx column displays the average
throughput for packets sent on the selected MU from the Access Port.
Bit Speed (Avg.) Mpbs Displays the average bit speed in Mbps for the selected MU. This includes all
packets sent and received.
% Non Unicast Displays the percentage of the total packets for the selected MU that are
non-unicast packets. Non-unicast packets include broadcast and multicast
packets.
Retries Displays the average number of retries per packet. A high number in this field
could indicate possible network or hardware problems.