Management features, Security features, Management features security features – Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 31: Interface management
Brocade Mobility RFS7000-GR Controller System Reference Guide
17
53-1001944-01
Software overview
1
•
You can now configure a set of allowed VLANs on a trunk port. Packets received on this port
that belong to other VLANs are discarded.
Interface management
The switch’s physical interfaces auto-negotiate speed and duplex. The switch also allows:
•
Manual bandwidth configuration of a physical interface speed to 10/100/1000Mbps.
•
Manual duplex configuration of a physical interface to Full Duplex or Half Duplex.
•
Manual configuration of administrative shutdown of a physical interface.
Management features
The switch supports the following management features:
•
A secure, browser-based management console
•
A Command Line Interface (CLI) accessible via the serial port or through Telnet or a Secure
Shell (SSH) application
•
A CLI Service mode enabling the capture of system status information that can be sent to
Brocade personnel for use in problem resolution
•
The support for Simple Network Management Protocol (SNMP) version 3 as well as SNMP
version 2
•
Upload and download of Access Port firmware and configuration files using TFTP and FTP
•
Transfer of firmware and configuration files using Compact Flash or USB
•
The graphing of wireless statistics
•
A GUI dashboard summary of system status
•
Multi switch management via MSP application
•
Heat map support for RF deployment
•
Secure guest access with specific permission intervals
•
Switch discovery enabling users to discover each Brocade switch on the specified network.
Security features
Switch security can be classified into wireless security and wired security.
The switch includes the following wireless security features:
•
•
•
•
•
•
•
The switch includes the following wired security features:
•