Configuring access point radio bandwidth – Brocade Mobility RFS7000-GR Controller System Reference Guide (Supporting software release 4.1.0.0-040GR and later) User Manual
Page 198
184
Brocade Mobility RFS7000-GR Controller System Reference Guide
53-1001944-01
Viewing Access Port Information
4
7. Enter a value between 0 and 15 for the Extended Contention Window maximum(ECW Max)
value.
The ECW Max is combined with the ECW Min to make the Contention Window. From this range,
a random number is selected for the back off mechanism. Lower values are used for higher
priority (video or voice) traffic.
8. Refer to the Status field for the current state of the requests made from applet. This field
displays error messages if something goes wrong in the transaction between the applet and
the switch.
9. Click OK to use the changes to the running configuration and close the dialog.
10. Click Cancel to close the dialog without committing updates to the running configuration.
Configuring access point radio bandwidth
Refer to the Bandwidth tab to view the QoS weight associated with each radio when added to a
WLAN. The weight represents the switch priority assigned to the traffic transmitted from the radio
for the WLAN.
For information on revising the weight assigned to each radio in respect to its intended operation
within its assigned WLAN, see
“Editing the WLAN configuration”
To view existing radio bandwidth weight settings:
1. Select Network > Access Port Radios from the main menu tree.
2. Click the Bandwidth tab.