Meridian America Link/Customer Controlled Routing User Manual
Page 561
Chapter 19: Single Terminal Access 543
Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide
Table 149
Port configuration
Prompt
Response
PORT TYPE
System
PORT NAME
Meridian Link/CCR
BAUD RATE
9600
DATA BITS
8
STOP BITS
1
INTERFACE
RS-232 DCE
EMULATION
EM200 8-bit Ctrl
CONNECT SEQUENCE
Ctrl-R (Read the instructions under
the function keys on how to enter
this information)
LOGOUT SEQ
Note: Step 20 must be completed for each port connected to a
monitored system.
21
Click
22
Select ÒEnable portÓ using the up/down arrow keys and press
[Return] to enable the Meridian Link/CCR system port.
STA is now available to monitor both Meridian Link/CCR and the
Meridian 1. You can access Meridian Link/CCR by pressing the
assigned function key as shown on the STA Main Menu. You may
have to press [Return] several times to get a response.
23
To return to the STA Main Menu, press [ESC] and type STA. Press
[Ctrl]+[R] to refresh the screen when needed.