Meridian America Link/Customer Controlled Routing - Manual (Page 357)

Chapter 12: Meridian 1 configuration for Meridian Link/CCR 339
Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide
Table 125
LD 11ÑDefine multi-line ACD telephones as AST
Prompt Response Comment
REQ NEW Add new telephones
TYPE aaa Enter telephone type as appropriate
TN l s c u Terminal number
DES ACD
CUST 0Ð99 Customer number
KLS 1Ð7 Number of key/lamp strips attached
¥
¥
¥ Press [Return] until the AST prompt
appears
AST 00 07 DN key(s) with AST telephone
assignment (host controllable);
Release 17 or later software. This
example shows keys 0 and 7
configured as AST.
IAPG (0)Ð15* AML link status message group,
defined in LD 15. Since Group 0
sends no messages, the default
value is not normally used. Group 1
(all messages) or a customer-
designated group (2Ð15) would
normally be used here.
¥
¥
¥ Press [Return] until the KEY prompt
appears
*Groups 10 through 15 are only available in X11 Release 17 or later
software.
Ñ continued С