Meridian America Link/Customer Controlled Routing - Manual (Page 414)

396 Chapter 14: Software installation, upgrade, and update procedures
553-3202-210 Standard October 1998
Procedure 1: Application configuration and start-up (continued)
21 You are prompted to reboot the system (Figure 144). Type y and
press [Return].
The appearance of the ÒConsole Login:Ó prompt indicates that the
new package is now installed. You may now log in to the system to
perform other commands. You may also restore configuration files
and data files from backup if necessary (Procedure 8: Restore
configuration files and data files from the backup tape).
22 For security, change the maint and other appropriate passwords. To
do this, log in as maint. The default password is maint.
The prompts are shown in Figure 114 with your input in bold.
Substitute your password for the xxxxx.
Figure 114
Change password prompts
maint>
chgpasswd
These login IDs may be changed:
maint
mlusr
ccrusr
Enter userÕs login ID [?, q]:
maint
New password:
xxxxx
Re-enter new password:
xxxxx
Do you want to change the password on
another login? [y, n, q]
n
23 If you have just installed a new IPE Module or Application Module,
go to Chapter 15, ÒLink configurationÓ to continue the configuration
and start-up process.
If you have just added Meridian Link Release 5C or CCR
Release 3C, you can now use it.