Meridian America Link/Customer Controlled Routing - Manual (Page 370)

352 Chapter 12: Meridian 1 configuration for Meridian Link/CCR
553-3202-210 Standard October 1998
Table 133
LD 10ÑCreating a Phantom Set (continued)
Prompt Response Comment
CUST 0-99 Customer number
¥
¥
¥ Press [Return] until the CLS prompt
appears.
CLS NDD No digit display is recommended if
configuring phantom devices.
CLS (DNDD) Dialed Name Display denied is
recommended if configuring
phantom devices.
¥
¥
¥ Press [Return] until the AST prompt
appears.
AST 00 Key 0 is AST.
IAPG (0)Ð15 Meridian Link Unsolicited Status
Message (USM) group. These
groups determine which status
messages are sent for an AST set.
The default 0 sends no messages,
whereas Group 1 sends all
messages.
ITNA (NO), YES Idle TN for third-party application.
Select YES for Phantom TN.
DGRP (1)Ð5 Device group with which phantom
TNs are associated.
¥
¥
¥ Press [Return] until the KEY
prompt appears.
KEY xx SCR yyyy Key number, Single Call Ringing,
DN
CLS xx RLS Key number, Releases.
Ñ end С