Meridian America Link/Customer Controlled Routing - Manual (Page 407)

Chapter 14: Software installation, upgrade, and update procedures 389
Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide
Procedure 1: Application configuration and start-up (continued)
Note: If you make a mistake while typing your Meridian ID or
keycode, do not try to backspace and correct the error. Instead,
continue until step 15, where you will be able to type n, press [Return]
and return to step 6.
Note: Input for the Meridian ID is case sensitive; input for the keycode
is not case sensitive.
Figure 98
Keycode prompt 1
Please enter your key code (5 groups of 4 characters each):
Keycode group 1 (or Q or q to quit):
7 You are prompted to enter your keycode (Figure 98). Type the first
four-character group of your keycode and press [Return].
Figure 99
Keycode prompt 2
Keycode group 2 (or Q or q to quit):
8 You are prompted for the second group of keycode characters. Type
the second group and press [Return].
Figure 100
Keycode prompt 3
Keycode group 3 (or Q or q to quit):
9 You are prompted for the third group of keycode characters. Type
the third group and press [Return].