Meridian America Link/Customer Controlled Routing User Manual
Page 556
538 Chapter 19: Single Terminal Access
553-3202-210 Standard October 1998
8
Configure the MSDL port for STA. Define the port and its
characteristics by responding to the following prompts in LD 17.
Substitute the device number where ÒxÓ appears in the Response
column.
Table 147
LD 17ÑConfigure MSDL port
Prompt
Response
Comment
REQ
CHG
Create or change information in the database
TYPE
CFN
Configuration record data block
ADAN
NEW TTY x
Add TTY with a logical ID x (0-15). The TTY
number must be the same as the DNUM of
the MSDL.
CTYP
MSDL
Card type is MSDL (automatic response)
GRP
0
Network Group Number (this prompt appears
only for Option 81 systems)
DNUM
x
Device number; same as TTY (automatic
response)
PORT
0
Admin port number (automatic response)
DES
STA_ADMIN
Designate port 0 for the STA terminal.
BPS
9600
Baud rate
PARY
NONE
Parity type
STOP
1
Number of stop bits
BITL
8
Data bit length
PARM
RS-232 DCE
Interface and transmission mode
FUNC
ABD FCL LME
MSDL card functions
USER
MTC SCH BUG
Output message types
XSM
NO
SDI port for the system monitor
TTYLOG
Log buffer size