Meridian America Link/Customer Controlled Routing User Manual
Page 476
458 Chapter 14: Software installation, upgrade, and update procedures
553-3202-210 Standard October 1998
Procedure 8: Load the application software from tape
Before loading the application tape (labelled Tape 2 of 2), ensure that you
reboot and go through setup as described in Procedure 7. This procedure
assumes you are at the ÒConsole Login:Ó prompt. If you have just performed
Procedure 7, you may see the Т#У prompt; if so, skip steps 1 and 2 and go to
step 3.
!
WARNING
If you plan to use Ethernet, ensure that your module is
connected to a working Ethernet backbone.
1
At the ÒConsole Login:Ó prompt, type root and press [Return] to log
in as the root user.
2
At the ÒPasswordÓ prompt, press [Return].
3
At the root shell prompt Т#,У type sysadm and press [Return].
Figure 225
System administration menu
SYSTEM ADMINISTRATION
1 diagnostics
system diagnostics menu
2 diskmgmt
disk management menu
3 filemgmt
file management menu
4 machinemgmt
machine management menu
5 packagemgmt
package management menu
6 softwaremgmt
software management menu
7 syssetup
system setup menu
8 ttymgmt
tty management menu
9 usermgmt
user management menu
Enter a number, a name, the initial part of a name, or
? or
4
At the system administration menu, type 6 and press [Return].