Meridian America Link/Customer Controlled Routing - Manual (Page 521)

503
Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide
Chapter 16: Additional application
configuration
In addition to configuring the links, you may need to perform other
procedures to configure the application or applications.
The Meridian Link application is shipped from the factory configured so
that the application starts automatically (auto-start) whenever the IPE
Module or Application Module is restarted.
The CCR application is shipped from the factory configured in the
following manner:
¥ The Meridian 1 customer number is configured according to
information given at ordering time.
¥ No regular backups are scheduled.
¥ CCR starts automatically (auto-start) whenever the IPE Module or
Application Module is restarted.
¥ English is the default system language, French is the default secondary
language.
¥ All terminal/printer ports are off; that is, configured for printers at 9600
baud.
¥ No printers are defined.
For CCR-only or co-resident systems, you may need to do the following:
¥ perform Procedure 18: Turn off auto-start
¥ perform Procedure 19: Change the Meridian 1 customer number