Meridian America Link/Customer Controlled Routing - Manual (Page 513)

Chapter 15: Link configuration 495
Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide
Procedure 14: Changing Meridian Link (link 1) parameters (continued)
Table 142
X.25 and LAPB parametersÑLink 1 (continued)
Link parameter Allowed values
(defaults in parentheses)
Description
T12 0Р(1800)Р9999 Amount of time (in 1/10 second
increments) the AM will wait for an
X.25 reset confirmation packet
after sending an X.25 reset
request packet to the host.
T13 0Р(1800)Р9999 Amount of time (in 1/10 second
increments) the AM will wait for an
X.25 clear confirmation packet
after sending an X.25 clear
request packet to the host.
T14 0Р(600)Р9999 Amount of time (in 1/10 second
increments) the AM will wait for a
packet with any P(R) value after
sending an X.25 data packet to
the host.
T15 0Р(1500)Р9999 Amount of time (in 1/10 second
increments) the AM will wait for a
packet with a P(R) value that
acknowledges a transmitted X.25
data packet to the host.
T16 0Р(1300)Р9999 Amount of time (in 1/10 second
increments) the AM will wait for an
X.25 interrupt confirmation packet
after sending an X.25 interrupt
request packet to the host.
Maximum T12 retries 0Р(3)Р9999 Maximum number of times the AM
sends reset requests due to T12
time outs.
Maximum T13 retries 0Р(3)Р9999 Maximum number of times the
MLM sends clear requests due to
T13 time outs.
Ñ end С