Meridian America Link/Customer Controlled Routing - Manual (Page 402)

384 Chapter 14: Software installation, upgrade, and update procedures
553-3202-210 Standard October 1998
Section 10: To update CCR from Release 3 to Release 3C
If you already have CCR Release 3 and want to update to Release 3C, you
must install the application and then enter a keycode to activate it.
To do this,
¥ Perform Procedure 2: Start the update process.
¥ Perform Procedure 3: Load application software from tape.
Section 11: To update CCR from Release 3 to Co-residency
If you already have CCR Release 3 and want to upgrade to co-residency,
you must install all applications. Then you must enter a keycode to activate
CCR and Meridian Link. Notice that, in this case, you automatically update
CCR to Release 3C.
To do this,
¥ Perform Procedure 2: Start the update process.
¥ Perform Procedure 3: Load application software from tape.