Meridian America Link/Customer Controlled Routing - Manual (Page 427)

Chapter 14: Software installation, upgrade, and update procedures 409
Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide
Procedure 3: Load application software from tape (continued)
18 You are asked whether you want to reenter the module name or
address (Figure 136).
If you have not made a mistake, type n and press [Return]. Go to
step 19.
If you want to reenter the module name and address, type y and
press [Return]; you will return to step 16.
Figure 137
Reboot prompt
Entry for with address
Now your system has been modified. You must reboot the system to have the new
kernel take effect.
Would you like to reboot the system now (y/n) ?
19 You are prompted to reboot the system (Figure 137). Type y and
press [Return].
Figure 138
Reboot messages 1
INIT: New run level: 6
The system is coming down. Please wait.
System services are now being stopped.
Terminating Applications
/usr/bin/maint: /dev/tty: cannot create
cron aborted: SIGTERM
The system is down.
NOTICE: System Reboot Requested (0)
The system clears and the following messages appear: