Meridian America Link/Customer Controlled Routing User Manual

Page 487

Chapter 14: Software installation, upgrade, and update procedures 469

Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide

Procedure 8: Load the application software from tape (continued)

You are asked whether you want to reenter the module name or
address (Figure 246).

If you have not made a mistake, type n and press [Return].

If you want to reenter the module name and address, type y and
press [Return]; you will return to step 22.

Figure 247
Reboot prompt

Would you like to reboot the system now (y/n) ?

You are prompted to reboot the system (Figure 247). Type y and
press [Return].

Figure 248
Reboot messages 1

INIT: New run level: 6
The system is coming down. Please wait.
System services are now being stopped.
Terminating Applications
/usr/bin/maint: /dev/tty: cannot create
cron aborted: SIGTERM

The system is down.

NOTICE: System Reboot Requested (0)

The system clears and the messages in Figure 249 appear.

Note: The following figure is illustrative only. Your messages may be
different, depending on the application(s) purchased.