Meridian America Link/Customer Controlled Routing - Manual (Page 11)

Contents xi
Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide
Section 6: To upgrade Meridian Link from Release 4B to
Release 5C and Co-residency 381
Section 7: To update Meridian Link from Release 5 to
Release 5C 382
Section 8: To update Meridian Link from Release 5 to 382
Section 9: To upgrade CCR from Release 2 to Release 3C
or 383
Section 10: To update CCR from Release 3 to Release 3C 384
Section 11: To update CCR from Release 3 to Co-
residency 384
Section 12: To update CCR Release 3B to Release 3C 385
sSection 13: To update CCR from Release 3B to Co-
residency 385
Section 14: To update Co-residency from one issue to
another issue of the same release 385
Section 15: Activating or de-activating a Meridian Link or
CCR feature 386
Section 16: To install or reinstall the software from tape 386
Procedure 1: Application configuration and start-up 388
Procedure 2: Start the update process 397
Procedure 3: Load application software from tape 399
Procedure 4: Power down the IPE Module or the
Application Module 411
Procedure 5: Load the operating system tape on an
Application Module with an MVME147 card 413
Procedure 6: Load the operating system tape on an IPE
Module or an Application Module with an MVME167
card
429
Procedure 7: Reboot and go through setup 448
Procedure 8: Load the application software from tape 458
Procedure 9: Restore configuration files and data files from
the backup tape 471
Procedure 10: Verify the installation 475
Procedure 11: Back up configuration files and data files 476