Meridian America Link/Customer Controlled Routing - Manual (Page 493)

Chapter 14: Software installation, upgrade, and update procedures 475
Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide
Procedure 10: Verify the installation
This procedure assumes that you have
¥ loaded the operating system (using Procedure 5 or 6)
¥ rebooted the operating system (using Procedure 7)
¥ loaded the application tape (using Procedure 8)
¥ restored the Release 2 configuration files and data files (using
Procedure 9)
This procedure verifies that Meridian Link Release 5C and CCR Release 3C
have been installed completely and correctly.
1 At the ÒConsole Login:Ó prompt, type maint and press [Return].
2 You are prompted for a password. Type the password and press
[Return]. The default password is maint.
3 At the Òmaint>Ó prompt, type fileverif and press [Return].
Messages appear as shown in Figure 256.
Figure 256
File verification messages
FILE VERIFICATION AS OF 09/20/93 12:13:01
................................................................
................................................................
................................................................
................................................................
................................................................
Static file verification found everything to be in order.
................................................................
................................................................
................................................................
................................................................
................................................................
Permissions and ownership tests found everything in order.
Structural verification found maint data files to be in order.
4 Type exit and press [Return] to go to the ÒConsole Login:Ó prompt.
Meridian Link and CCR have now been installed and verified.