Diagnostic messages) – Meridian America Link/Customer Controlled Routing User Manual

Page 488

470 Chapter 14: Software installation, upgrade, and update procedures

553-3202-210 Standard October 1998

Procedure 8: Load the application software from tape (continued)

Figure 249
Reboot messages 2

M4120 Debugger/Diagnostics Release Version 1.1 - 09/30/92 (IR01)
COLD Start

Local Memory Found =01000000 (&16777216)

MPU Clock Speed =25Mhz

Autoboot in progress... To abort hit
Booting from: M4120, Controller 0, Drive 0
Loading: Operating System

(diagnostic messages)

Initializing For Applications

Configure Link 0 : successful

Enable Link 0 : successful

Application release successful
Starting Applications

06/01/94 20:55:53 Starting CCR Application...
Starting Customer Controlled Routing Processes...

Performing modem reset...
Connected
Sending atz
to the device.
Done modem reset.
The system is ready.

Console Login:

Remove the application tape from the cassette tape drive.

The appearance of the ÒConsole Login:Ó prompt indicates that the
new application software is now installed. You may now log in to the
system to perform other commands. You may also restore
configuration files and data files from backup if necessary
(Procedure 9: Restore configuration files and data files from the
backup tape).