Meridian America Link/Customer Controlled Routing - Manual (Page 105)

87
Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide
Chapter 5: Hardware installation
overview
Preparing for installation
As soon as the IPE Module or Application Module is delivered, make sure
that all deliverable items are present by checking them against the packing
slips. Move the equipment to its permanent location before beginning the
installation.
Ensure that you have the following tools available:
¥ antistatic wrist strap
¥ BIX connector tool (NT product number GYBIX16)
¥ carpenterÕs level
¥ extraction tool (P0741489)
¥ hammer
¥ Phillips screwdriver (small, medium)
¥ slotted screwdriver (small, large)
¥ socket
¥ wrenches (1/4, 5/16, and 9/16 in.)
¥ volt meter
¥ wire cutters
¥ wire strippers