KEYENCE IV Series - Manual (Page 89)

4-21 - IV Series User's Manual (Monitor) -
Registering the master image
1
Start the Settings Navigator.
“Starting the Settings Navigator” (Page 4-3)
2
Display the main screen for the Master
Registration.
“Settings Navigator screen and operation flow”
(Page 4-4)
3
Place the high-quality-target as reference
of judgment on the imaging position.
4
Tap the [Register Live Image as Master]
button.
Switches to the [LIVE] screen.
5
Image the target.
If the target is to be imaged using an external
trigger, input the external trigger.
If an external trigger cannot be input, tap the
button (Page 4-7) to image the target by
inputting an internal trigger temporarily. Imaging
by inputting an internal trigger finishes by the
button.
6
Check the image displayed on the monitor
and tap the [Register] button.
The confirmation dialog for the Master Registration
appears.
7
Tap the [OK] button.
The master image will be registered and returns
to the main screen for the Master Registration.
The disabling outline settings (Page 4-35, Page 4-55)
will be initialized. Set the disabling outline settings
again as needed.
Register Live Image as Master Extended functions
1. Image Optimization 2. Master Registration 3. Tool Settings 4. Output Assignment
4
Settings Navigator (Setting the Judgment Condition)