KEYENCE IV Series - Manual (Page 57)

3-7 - IV Series User's Manual (Monitor) -
Operation when the Power is Turned on
Operation for initial startup of
the monitor (Network Connection)
When connecting to a network, let engineers who
are knowledgeable about networks handle it.
Setting the network address of the
monitor
1
Turn on the power of the monitor.
The screen to select the language opens.
2
Select the language to be displayed on
the monitor and tap the [OK] button.
[English] is selected in the default setting.
3
Set the current date and time, and tap the
[OK] button.
y Move to the item to be set by the [←] or [→]
button and enter the numbers.
y Tap the [Delete] button to reset the display of
the selected item.
4
Select the [Network Connection] button
and tap the [OK] button.
The Complete Configuration screen opens.
5
Tap the [OK] button.
The Network Settings screen opens.
6
Tap each [Edit] button of the IP address,
subnet mask, and default gateway.
The screen to set each item opens.
At the initial startup or initialization of
the monitor, the monitor starts up with
192.168.10.1 as the IP address.
If there is a device with the same IP address
on the network, change the IP address before
connecting the monitor to the network.
3
Basic Operation