KEYENCE IV Series - Manual (Page 59)

3-9 - IV Series User's Manual (Monitor) -
Operation when the Power is Turned on
z z When a sensor with no IP address is found
Empty
z z
When a sensor with an IP address is found
IP address
3
When multiple sensors are found, select
the sensor to be connected with the [<] or
[>] button.
4
Connect to the sensor.
z z When connecting to the sensor with no IP
address
Tap the [Connect] button.
The confirmation dialog appears.
Tap the [OK] button.
The confirmation dialog appears.
Tap the [Yes] button to copy the network
settings of the monitor.
When copying is completed, the information
screen opens.
Tap the [OK] button.
The sensor network setup screen opens.
Tap each [Edit] button of the IP address, subnet
mask, and default gateway, and set these items
individually.
When the monitor's IP address is copied,
the sensor's and monitor's IP address will be
duplicated. Make sure to change the IP address.
IP address
3
Basic Operation