KEYENCE IV Series - Manual (Page 203)

6-27 - IV Series User's Manual (Monitor) -
Setting the Extended Functions of the Sensor
z z Option
The input option screen opens by tapping the
[Option] button.
[Write ROM when using “Ext. Master Save”?]
Selecting the [Yes] button writes the data to
the ROM of the sensor when the master image
registration is performed with the external input
or field network.
“Registering the Master Image” (Page 7-8)
3
After the setting is completed, tap the
[Close] button.
The system returns to the I/O Settings screen of
the sensor.
Output Settings
1
Tap the [Settings] button of the Output Settings.
2
Set the Output Settings of the sensor.
z z
OUT1 to OUT4
Specifies the output format of the output line
with [N.O] or [N.C].
z z Common Output Settings
The screen to select the output type opens by
tapping the [Common Output Settings] button.
“Changing the timing of the status output” (Page 7-6)
[Latching]
Outputs the result along with the judgment
condition of the sensor.
[One-Shot]
Sets the one-shot time and ON-delay time in
which output the status output with one-shot.
y One-Shot ON Time
Specifies the flash width of the one-shot within
1 to 1000 msec.
y ON-Delay Time
Specifies the ON-delay time of the one-shot
flash within 0 to 5000 msec.
For details of settings by the slider or inputting
value, refer to “Editing the value with the
slider” (Page 3-14).
3
After the setting is completed, tap the
[Close] button.
The system returns to the I/O Settings screen of
the sensor.
6
Useful Features/V
arious Functions