KEYENCE IV Series - Manual (Page 182)

6-6 - IV Series User's Manual (Monitor) -
List of the Useful Features
Items Things you want to do Useful functions Description
Reference
page
I/O lines
Confirm whether or not the
input and output lines are
correctly wired
I/O Monitor
The operation test for the input
and output line can be performed.
6-28
Switch to NPN output or PNP
output
Polarity
The polarity can be changed
to NPN or PNP according to
the controlling device used.
6-28
Switch the output to N.O. or N.C. Output Settings
The settings for each OUT can
be changed to N.O. or N.C.
6-27
Output the status output with
one-shot
Common Output
Settings
The output can be changed
from latching output to one-
shot output.
6-27
Output the status output with
on-delay
Common Output
Settings
On-delay time can be set for
the one-shot output.
6-27
Switch the external trigger to
rise or fall
Input Settings
Rising trigger or falling
trigger can be selected as
the operation of the external
trigger
6-26
Output the NG status results Total status NG
output
When the total status result
of each detection tool was
NG, the total status NG output
function turns ON.
4-60
Confirm whether or not the
sensor is running properly
RUN output
When the sensor is running
with no system error occurring,
the output function turns ON.
4-60
Form a logical operation of
status result
Logic output
Logical operation result of each
detection tool can be assigned
to the output function.
4-63
Change the total status
conditions
Total status
conditions
The total status conditions can
be selected from [All Tools OK]/
[Any Tool OK]/[Logic 1] to [Logic
4].
4-65
6
Useful Features/V
arious Functions