Monitor, Monitor -15 – KEYENCE IV Series User Manual
Page 31
1-15
- IV Series User's Manual (Monitor) -
Name and Function of Each Part
Monitor
4
5
6
3
7
2
1
8
9
10
1 Power connector
Connects the monitor power cable.
2 Connector for the monitor cable/Ethernet
cable
Connector for connecting the monitor cable or
Ethernet cable. Used when connecting with the
sensor or Ethernet switch.
3 Unlock button
Push this button when dismounting the monitor from
the wall mounting adapter or DIN mounting adapter.
“Unmounting from the wall mounting adapter”
“Unmounting from the DIN mounting adapter”
4 Indicator light (PWR)
Indicates the operating status of the monitor.
y
Green (ON) ...... The power is turned ON.
y
Red (ON) .......... Unrecoverable error occurred
to the sensor or monitor.
y
Red (Blink) ....... Recoverable error occurred to
the sensor or monitor.
y
(OFF) ............... The power is turned OFF.
For countermeasures when an error occurred,
refer to “Error Messages” (Page A-22).
5 Indicator light (SENSOR)
Indicates the connecting status to the sensor.
y
Green (ON) ...... Connected normally to the
sensor.
y
Green
(Slowly blinks)
... Linked normally but it is not
properly connected to the
sensor.
y
(OFF) ............... It is not properly connected
because it did not link
normally.
If the monitor cannot correctly connect with the
sensor, refer to “Remedy when the Monitor
cannot be Connected with the Sensor” (Page A-28).
6 LCD monitor/Stylus
Displays the operation screen and setup screen.
Operates by touching the screen with the stylus.
7 USB connecting connector
Connector for connecting the USB memory.
Connector is protected by the cover.
“Saving the Sensor Settings and Images to a
8 Stylus
Used to operate the touch-screen.
9 Stylus holder
Stores the stylus.
10 Strap holder
Holds the strap or hangs the stylus.
1
Getting Started