KEYENCE IV Series - Manual (Page 30)

1-14 - IV Series User's Manual (Monitor) -
Name and Function of Each Part
z „
Operation of the indicator light
Details on operations of the indicator light are
shown below.
1 2 3
4 5
1 PWR/ERR
Indicates the power supplying status to the
sensor and the error status of the sensor.
y Green (ON) ...... Operating.
y Green (Blink) .... Setting processing. Operation
is stopped. Blinks once a
second.
y Red (ON) .......... Unrecoverable error has
occurred.
y Red (Blink) ....... Recoverable error has
occurred.
y (OFF) ............... Power is not supplied.
Adjusting the focusing position
(manual focus only).
For countermeasures when an error occurred,
refer to “Error Messages” (Page A-22).
2 OUT
Indicates the comprehensive result.
y Green ............... Comprehensive result is “OK”.
y Red .................. Comprehensive result is “NG”.
y (OFF) ............... Setting processing.
Standby status until the first
judge finishes after starting the
operation or after switching
the program number.
y Orange (Blink) .. Indicates the focusing status
while adjusting the focusing
position with the blinking speed
(manual focus type only).
“Focus adjustment for
the manual focusing type”
(Page 4-14)
3 TRIG
Green light lights up (one-shot) according to
input of the internal or external trigger.
4 STATUS
Indicates the connection status within the monitor.
y Green (ON) ...... Normally connected with
monitor.
y Green (Blink) .... IP address has been retrieved
but the sensor is not correctly
connected with monitor.
y (OFF) ............... IP address is not assigned.
Sensor is not correctly
connected with monitor.
y Orange (Blink) .. Indicates the focusing status
while adjusting the focusing
position with the blinking speed
(manual focus type only).
“Focus adjustment for the
manual focusing type” (Page 4-14)
When the sensor cannot correctly connect with
the monitor, refer to “Remedy when the
Monitor cannot be Connected with the Sensor”
(Page A-28).
5 LINK/ACT
Indicates the linking status within monitor or
Ethernet switch.
y Green (ON) ...... Normally linked.
y Green (Blink) .... Normally linked, and the data
is sending/receiving.
y (OFF) ............... Sensor is not normally linked.
1
Getting Started