KEYENCE IV Series - Manual (Page 121)

4-53 - IV Series User's Manual (Monitor) -
Setting the Position Adjustment tool
1
Start the Settings Navigator.
“Starting the Settings Navigator” (Page 4-3)
2
Display the main screen for the Tool settings.
“Settings Navigator screen and operation flow”
(Page 4-4)
3
Tap the [Add Tool] button and then the
[Pos.Adj.] button.
“Adding a tool” (Page 4-31)
The main screen for the Position Adjustment tool
settings opens.
4
Tap the [Edit Window] button.
The screen to set the [Window Shape] and
[Search Region] opens.
y Once the tool window is tapped, you can
proceed to step 8.
y By tapping the < > extended functions display
button, the extended functions menu for the
position adjustment tool will be displayed.
“Extended functions for the Position
Adjustment tool” (Page 4-57)
5
Tap the [Window Shape] button.
The screen to select the window shape opens.
6
Select a tool window shape.
¨ Rect ¡ Circle
7
Tap the [OK] button.
The system returns to the screen to set the
[Window Shape] and [Search Region].
8
Set the position, size, and angle of tool
window in accordance with a target.
Set the tool
window
Set the position and size of tool window as
large as possible by selecting the part that is
dissimilar in shape.
“Stabilizing the position adjustment” (Page 5-37)
For details of editing the tool window, refer to
“Editing the tool window” (Page 3-15).
9
Set a search region as needed.
“Setting a search region” (Page 4-55)
10
After the setting is completed, tap the [OK]
button.
The system returns to the main screen for the
Position Adjustment tool settings.
Outline tool Color Area/Area tool Position Adjustment tool Extended functions
1. Image Optimization 2. Master Registration 3. Tool Settings 4. Output Assignment
4
Settings Navigator (Setting the Judgment Condition)