Preparing the program functions, Preparation flow, Preparation procedures – KEYENCE IV Series User Manual

Page 185: Preparing the program functions -9, Preparation flow -9, Preparation procedures -9

6-9

- IV Series User's Manual (Monitor) -

Changeover for a Target (Program Functions)

Preparing the program functions

Registers the judgment condition for each product
to the program before running.

Preparation flow

(1) Select a program number

Select a program number to register a judgment
condition from PROG00 to PROG31.

(2) Set a judgment condition in the Settings

Navigator
Set the judgment condition for a product in the
Settings Navigator.

(3) Select a program switch method

Select a switch method. There are methods
such as switching from the external input line or
switching by tapping the monitor.

The following functions can be used with the

preparations for the program function.

The product name can be registered to the

program.

To register a similar product, the program can

be copied, and then the settings can be edited.

Initializes and returns the judgment condition

registered in the program to the status before

setting.

Preparation procedures

Display the Sensor Setup Menu screen.

“Displaying the Sensor Setup Menu Screen”

Select a program number to register a

judgment condition of a product.

Select the

program

The program can also be selected from the

Set a judgment condition in the Settings

Navigator.

“Chapter 4 Settings Navigator (Setting the

Repeat steps 2 and 3 to register programs

for the number of products that are to be

changed over.

Useful Features/V

arious Functions