KEYENCE IV Series - Manual (Page 116)

4-48 - IV Series User's Manual (Monitor) -
Extended functions of the Color Area/Area tool
Items Description Setting range
Default
value
Advanced Color
Extraction
(For color type)
Advanced Brightness
Extraction
(For monochrome type)
y Color type
Specifies a color to be extracted as HSB
(H: Hue, S: Saturation, B: Brightness).
y H (hue)
0° to 359°
(both starting point
and ending point)
y S (saturation)
0 to 255
y B (Brightness)
0 to 255
-
y Monochrome type
Specifies brightness value to be
extracted.
0 to 255 -
to Live Image
A color/brightness range to be extracted
can be set on the Live image of the target.
- -
Tool Name
An arbitrary name such as name of a
target can be set to tools. Tool names can
be checked on the run screen.
“Chapter 5 Operating/Adjusting” (Page 5-1)
Up to 8 characters
in one byte English
characters can be set.
(None)
Fixed Reference Area Select a condition which the matching rate
of the Color Area/Area is 100%.
y Disable
Matches the area
extracted from the
master image as the
criteria of a rate of
100%.
y Enable: Large
Matches 1/10th of
the total sensor view
as the criteria of a
rate of 100%.
y Enable: Small
Matches 1/100th of
the total sensor view
as the criteria of a
rate of 100%.
Disable
Outline tool Color Area/Area tool > Extended functions Position Adjustment tool Extended functions
1. Image Optimization 2. Master Registration 3. Tool Settings 4. Output Assignment
4
Settings Navigator (Setting the Judgment Condition)