KEYENCE IV Series User Manual
Page 283
A-27
- IV Series User's Manual (Monitor) -
A
Error Messages
Message
Cause
Remedy
Output/
Indicator
This file configuration data is for
xxxx.
This file is not readable.
The setting files for a
different model of sensors
cannot be read.
Read the setting files of a sensor
of the same model.
FTP Connection Error
Connection with the FTP
server failed.
Refer to “Remedy when data
transfer via FTP is unavailable”
*2
FTP Transfer Error
(Transfer Failed)
Data transfer to the
transfer destination folder
failed.
FTP Transfer Error
(Insufficient Data Buffer)
Data which is larger than
the remaining storage of
the FTP buffer has been
created and the transfer
failed.
*1 Error output from the sensor: ON, PWR/ERR indicator light of the sensor: Lighting (red),
PWR indicator light of the monitor: Lighting (red)
*2 Error output from the sensor: ON, PWR/ERR indicator light of the sensor: Blinking (red),
PWR indicator light of the monitor: Blinking (red)
*3 PWR indicator light of the monitor: Lighting (red)
*4 SENSOR indicator light of the monitor: Off