KEYENCE IV Series - Manual (Page 202)

6-26 - IV Series User's Manual (Monitor) -
Setting the Extended Functions of the Sensor
I/O Settings
Sets the input/output settings for the sensor.
1
Tap the [Sensor Advanced] button in the
Sensor Setup Menu screen.
2
Tap the [Environmental] button and then
the [I/O Settings] button.
3
Set the input/output settings for the
sensor.
“Input Settings” (Page 6-26)
“Output Settings” (Page 6-27)
“Polarity” (Page 6-28)
“I/O Monitor” (Page 6-28)
4
After the setting is completed, tap the [OK]
button.
The system returns to the Sensor Advanced screen.
Input Settings
1
Tap the [Settings] button of the input settings.
2
Set the input settings for the sensor.
z z IN1
Sets the detection timing of the trigger input for
IN1 input line.
y Ext. Trigger ↑
Sets the trigger input to the rising edge of the
external trigger.
y Ext. Trigger ↓
Sets the trigger input to the falling edge of the
external trigger.
z z
IN2 to IN6
Sets the roles for input line IN2 to IN6.
y OFF
Ignores the input.
y Program bit0 to bit4
Specifies the number for switching the programs.
“Changeover for a Target (Program Functions)”
(Page 6-8)
y Clear Error
Sets the error output clearance.
y Ext. Master Save
Sets the master image registration from the
external input.
6
Useful Features/V
arious Functions