KEYENCE IV Series - Manual (Page 138)

5-4 - IV Series User's Manual (Monitor) -
Names and Functions of the Operation Screen
In the operation screen, the displayed items will be different depending on the ON/OFF of the menus.
Menu Screen
(1)
(2)
(9)
(10)
(11)
(8)
(5)
(6)
(4)
z z Menu OFF
(3)
(5)
(7)
(3)
(15) (16) (17) (18)
(1)
(2)
(9)
(10)
(11)
(13)
(12)
(14)
(8)
z z Menu ON
(4)
(1) Title
Displays the device name (Page 6-29), program
number (Page 6-7), and program name of the
sensor (Page 6-12).
(2) Tool Name
Displays the tool number and tool name of the
tool selected on the monitor (Page 4-30).
The selected tool can also be switched.
(3) Brightness correction region
When the brightness correction is being set, the
brightness correction region will be displayed
with a blue frame.
(4) Tool window
Displays the tool region which has been set with
green frame when the status result is OK, and
displays with red frame when the status result is
NG.
The tool selected by tapping the region can also
be switched.
“Selecting a display method for tools” (Page 5-7)
(5) Search region
If the search region of the selected tool is being
set to partial, the search region will be displayed
with a light blue frame. If the position adjustment
is being set, the search region after the position
adjustment will be displayed.
(6) [Menu] button
Switches to the display in Menu ON mode.
When the touch panel is locked, the will
be displayed.
“Touch Screen Lock” (Page 6-50)
(7) [OFF] button
Switches to the display in Menu OFF mode.
(8) Status gauge
Displays status results (OK/NG) of the tool
selected on the monitor, a line indicating the
threshold, and a value of the matching rate.
When the status gauge is tapped, the operation
turns to Threshold Adjustment mode (Page 5-14).
Judge is OK (green) Judge is NG (red)
Matching rate Threshold
For details of the status results, refer to
“Displaying and outputting the status result”
(Page A-4).
(9) OK/NG display
Displays the total status result.
y If the total status result is OK, OK will be
displayed. The total status conditions can be
selected from [All Tools OK]/[Any Tool OK]/
[Logic 1] to [Logic 4].
y If the total status result is NG, NG will be
displayed.
(10) Processing time
Displays the time from receiving an external
trigger or an internal trigger to output the status
result. In the case of the One-Shot output (Page
6-27), the ON-Delay Time is not included.
Names and Functions of the Operation Screen
5
Operating/Adjusting