KEYENCE IV Series - Manual (Page 43)

2-11 - IV Series User's Manual (Monitor) -
Mounting the Monitor
Mounting to the DIN rail
Mount the DIN mounting adapter (OP-87466) to the
monitor, and mount it to the DIN rail.
The monitor can be operated by the following methods.
y Pick up the monitor from the DIN mounting
adapter and operate it.
y Operate it while mounted on the DIN rail.
Mounting using DIN mounting adapter
1
Mount the monitor to the DIN mounting
adapter.
Slide the monitor until the end of the stopper,
and confirm that the monitor is locked.
Stopper
z z Fixing to the DIN mounting adapter
To fix the monitor to the DIN mounting adapter,
use the attached screws.
y Screw : M3 x 2
Use the attached flat head screw.
y Tightening torque : 0.27 to 0.33 N·m
2
Adjust the position of the DIN mounting
adapter and the DIN rail by pulling down
the stopper of the adapter, and then push
up the stopper to lock it.
Stopper
Unmounting from the DIN mounting
adapter
Unlock the monitor from the DIN mounting adapter
by pulling toward the unlock button. And slide up to
unmount the monitor mounted to the adapter.
Unlock
2
Installation and Connection