KEYENCE IV Series - Manual (Page 125)

4-57 - IV Series User's Manual (Monitor) -
Extended functions for the Position Adjustment tool
Items Description Setting range
Default
value
Rotation
Range
Sets a range to adjust the position to the rotating direction.
The status result of position adjustment is NG without adjusting
the position if an angle of a target exceeds its rotation range.
yIf the setting of rotation range is too wide, the acceptable range
of variation in angles when a target is placed can be set wider.
y If the setting of rotation range is too narrow, the
processing time can be shorten.
0 to ±180°
(Unit: ±1°)
±20°
Margin Select whether or not to allow the margin for the limited
angle set in Rotation Range.
y ON
The tool window will
search with the range
± few degrees wider
than the setting value
of rotation range.
y OFF
The tool window will
search only within the
set rotation range.
ON
z „
Rotation Range
1
Display the extended functions menu for
the Position Adjustment tool.
“Display Method of Extended Functions Menus”
(Page 4-66)
2
Tap the [Rotation Range] button.
3
Set the rotation range of the Position
Adjustment tool.
For details of settings by the slider or inputting
value, refer to “Editing the value with the
slider” (Page 3-14).
4
Set a margin of the rotation range.
y Select [ON] when the position adjustment
is not stable because of the influence of the
rotation angle of the target.
The tool window will search with the range ±
few degrees wider than the setting value of
rotation range.
(The tool window will search ± few degrees
even if the rotation range is set to 0°.)
y Select [OFF] when you would like to detect
the target in accordance with the set rotation
angle of the target.
5
After the setting is completed, tap the [OK]
button.
The system returns to the main screen for the
Position Adjustment tool settings.
Outline tool Color Area/Area tool Position Adjustment tool > Extended functions Extended functions
1. Image Optimization 2. Master Registration 3. Tool Settings 4. Output Assignment
4
Settings Navigator (Setting the Judgment Condition)