KEYENCE IV Series - Manual (Page 61)

3-11 - IV Series User's Manual (Monitor) -
Operation when the Power is Turned on
Operation for initial startup of
the sensor
When the monitor is connected to the sensor in
the default setting, the screen to select the polarity
(NPN or PNP) opens.
After the polarity is selected, set up the sensor in
Settings Navigator.
For details of the Polarity, refer to “Specification
of I/O circuit and current of the sensor” (Page 2-14).
1
Select the Polarity of the sensor and tap
the [OK] button.
The Sensor Setup Menu screen opens.
2
Tap the [Sensor Setup] button and set up
the program.
For details of the Settings Navigator, refer to
“Chapter 4 Settings Navigator (Setting the
Judgment Condition)” (Page 4-1).
3
Basic Operation