KEYENCE IV Series - Manual (Page 228)

6-52 - IV Series User's Manual (Monitor) -
Setting the Advanced Monitor Information
Backlight
Sets the backlight of the monitor.
The monitor recovers from dim mode when the
touch panel is operated or when an error occurs
1
Tap the [Monitor Settings] button with the
state that the menu display of the monitor
is set to ON.
2
Tap the [Monitor Environment] button and
then the [Backlight] button.
3
Set the backlight of the monitor.
z z
Backlight Brightness
Adjusts the brightness of the backlight.
The brightness can be adjusted between level 1 to 7
(default : 5).
z z Auto Off
Selects the [Enable]/[Disable] for the Auto Off
function.
z z Auto Off Time Delay
This is available when the [Enable] is selected for
the Auto Off function. Sets the time delay of the
monitor to be dimmed. Also, after 30 minutes since
the monitor being dimmed, the monitor turns off.
Options: 30 sec/1 min/5 min/10 min/30 min
4
After the setting is completed, tap the [OK]
button.
The system returns to the Monitor Settings screen.
Touch Panel Calibration
Adjusts the position to be touched of the touch panel.
This setting is adjusted by default.
1
Tap the [Monitor Settings] button with the
state that the menu display of the monitor
is set to ON.
2
Tap the [Monitor Enviroment] button and tap
the [Touch Panel Calibration] button.
The confirmation dialog appears.
3
Tap the [OK] button.
The screen switches to the screen to adjust the
position to be tapped.
4
Follow the message displayed on the
monitor and tap the center of the cross
mark ( ) in order.
After the adjustment for the positions to be tapped
is completed, the message "Touch panel calibration
completed. Touch the screen to exit." appears.
5
Tap the monitor.
The system returns to the Monitor Settings screen.
6
Useful Features/V
arious Functions