Remedy when connection via – KEYENCE IV Series User Manual
Page 285
A-29
- IV Series User's Manual (Monitor) -
A
Remedy when the Monitor cannot be Connected with the Sensor
Remedy when connection via a network is unavailable
Status
Remedy
Retries occur repeatedly because
connection is not possible after the power is
turned on.
y
Supply power to the sensor and the network equipment.
y
Correctly connect with the sensor and the network
equipment.
“Connecting via network” (Page 2-16)
y
After a correct connection is established as a result of
retry, the run screen opens automatically.
The Sensor Connect screen opens when the [Cancel]
button or [OK] button is tapped.
y
Tap the [Connect] button after a correct connection has
established.
y
Tap the [Search Sensor] button to search for the sensor.
“Searching for and connecting to sensors on the
If a connection is unavailable, refer to “When the
connection cannot be established by searching for the
y
Tap the [Specify Sensor] button to connect the sensor.
“Specifying the IP address of and connecting to the
If a connection is unavailable, refer to “When the
connection cannot be established by specifying the
y
An error (381) "Data transfer to sensor
fails." may also be displayed.
y
Connection became impossible after
connection was established once.