KEYENCE IV Series - Manual (Page 29)

1-13 - IV Series User's Manual (Monitor) -
Name and Function of Each Part
Name and Function of Each Part
Sensor
z „ Name and function of each part of the
sensor
1
2
3
4
5
6
7
8
1 Mounting adapter
Use this for mounting and fixing the sensor.
“Mounting the Sensor” (Page 2-2)
2 Connector for power I/O cable
Connector for connecting the power I/O cable.
Use this for supplying the power to the sensor
and for connecting with external devices.
“Cables” (Page 2-12)
3 Focusing position adjustment screw
(manual focus type only)
Adjusts the focus of the displayed image.
“Focus Adjustment” (Page 4-12)
4 Connector for monitor cable/Ethernet cable
Connector for connecting a monitor cable or
Ethernet cable. Use this for connecting the
monitor, PC, or Ethernet switch.
“Cables” (Page 2-12)
When the cable is not connected, attach
the waterproof cap for Ethernet connector
to maintain enclosure rating.
Tightening torque : 0.45 to 0.55 N·m
5 Indicator light
Indicates the operating status of the sensor.
“Operation of the indicator light” (Page 1-14)
6 Built-in light
LED light that illuminates the target
7 Camera
Images the object.
8 Front cover
Protects the camera and built-in lights.
The front cover is protected by the protection
sheet (blue) in the default factory setting. Remove
the sheet when the sensor is to be used.
Front cover for replacement is provided for
maintenance.
“Replacing the front cover” (Page A-41)
1
Getting Started