KEYENCE IV Series - Manual (Page 101)

4-33 - IV Series User's Manual (Monitor) -
Setting the Outline tool
1
Start the Settings Navigator.
“Starting the Settings Navigator” (Page 4-3)
2
Display the main screen for the Tool settings.
“Settings Navigator screen and operation flow”
(Page 4-4)
3
Tap the [Add Tool] button and tap the
[Outline] button.
“Adding a tool” (Page 4-31)
The main screen for the Outline tool settings opens.
4
Tap the [Edit Window] button.
The screen to set the [Window Shape] and
[Search Region] opens.
y Once the tool window is tapped, you can
proceed to step 8.
y By tapping the < > extended functions
display button, the extended functions menu
for the Outline tool will be displayed.
“Extended functions for the Outline tool”
(Page 4-37)
5
Tap the [Window Shape] button.
The screen to select the window shape opens.
6
Select a tool window shape.
¨ Rect ¡ Circle
7
Tap the [OK] button.
The system returns to the screen to set the
[Window Shape] and [Search Region].
8
Set the position, size, and angle of the
tool window in accordance with the target.
Set the tool
window
For details of editing the tool window, refer to
“Editing the tool window” (Page 3-15).
9
Set a search region as needed.
“Setting a search region” (Page 4-35)
10
After the setting is completed, tap the [OK]
button.
The system returns to the main screen for the
Outline tool settings.
11
Adjust the outline as needed.
“Settings for disabling outlines” (Page 4-35)
“Setting a sensitivity” (Page 4-36)
Outline tool Color Area/Area tool Position Adjustment tool Extended functions
1. Image Optimization 2. Master Registration 3. Tool Settings 4. Output Assignment
4
Settings Navigator (Setting the Judgment Condition)