KEYENCE IV Series - Manual (Page 267)

A-11 - IV Series User's Manual (Monitor) -
A
Settings List
Sensor Advanced screen
Menu Description Setting range
Reference
page
Environmental 6-25
I/O Settings
Input
Settings
IN1
Sets a detection timing of
the trigger input for IN1
input line.
y Ext. Trigger ↑
y Ext. Trigger ↓
6-26
IN2 to IN6 Sets a function to the
input line IN2 to IN6.
y OFF
y Program bit0 to bit4
y Clear Error
y Ext. Master Save
6-26
Option
Sets whether or not to
write data into ROM
when the external master
image registration is
performed.
y Yes
y No (default value)
6-26
Output
Settings
OUT1 to
OUT4
Sets the output line
settings (OUT1 to 4).
y N.O.
y N.C.
6-27
Common
Output
Settings
Selects an output mode.
y Latching (default value)
y One-Shot
6-27
Polarity
Selects the polarity (I/O
format) of the sensor.
y NPN
y PNP
6-28
I/O Monitor
Checks whether an input
line for control is correctly
wired or not.
y ON
y OFF
6-28
Device
Name/
Pass
Device Name Sets a name of the sensor.
Up to 16 characters
(English and Japanese
single byte characters)
6-29
Security
Password
Lock
Sets the Password
Lock function to enable/
disable.
y ON
y OFF (default value)
6-30
Password
Sets a password when the
Password Lock function of
the sensor is enabled.
Up to 8 characters
(English and Japanese
single byte characters)
6-30
Network
Settings
MAC Address
Displays the MAC
address for the sensor.
- 6-31
IP Address
Displays the IP address
of the sensor.
- 6-31
Subnet Mask
Displays the subnet mask
of the sensor.
- 6-31
Default Gateway
Displays the default
gateway of the sensor.
- 6-31