KEYENCE IA Series - Manual

1 IA Series-IM_E
CMOS Laser Analog Sensor
IA Series
Instruction Manual
Read this manual before using the product in order to achieve maximum
performance.
Keep this manual in a safe place after reading it so that it can be used at
any time.
„ Symbols
The following symbols alert you to important messages. Be sure to read these
messages carefully.
* The classification is implemented based on IEC60825-1 following the requirement of
Laser Notice No.50 of FDA (CDRH).
Safety measures for the laser
„ Laser radiation emission indicator
The laser radiation emission indicator lights up after turning on the power and
while the laser beam is being emitted.
„ Laser emission stop input
The laser emission stops when an emission stop (purple line) signal is input (for
20 ms or longer). The emission stops while the signal is input. The laser beam is
emitted a maximum of 20 ms after the signal input is canceled. An analog output
of 0.2 V is delivered during laser emission stop.
„ Warming up
Leave the IA Series about 30 minutes after turning on the power.
The circuit is not stable immediately after the power turns on, so the display
value may gradually drift.
„ Laser warning labels
The following diagrams show the type and position of laser warning labels
according to the IA Series.
The IEC warning/explanatory labels are only included with Class 2 laser
products.
When using this product in the countries and/or regions other than U.S., use the
IEC warning/explanatory label in the package of this product.
In this case, it can be affixed on the FDA (CDRH) warning label, which has
already been affixed to this product.
It indicates a hazardous situation which, if not avoided, will
result in death or serious injury.
It indicates a hazardous situation which, if not avoided, could
result in death or serious injury.
It indicates a hazardous situation which, if not avoided, could
result in minor or moderate injury.
It indicates a situation which, if not avoided, could result in
product damage as well as property damage.
It indicates cautions and limitations that must be followed
during operation.
It indicates additional information on proper operation.
It indicates tips for better understanding or useful information.
Safety Information for IA series
• This product is just intended to detect the object(s). Do not
use this product for the purpose to protect a human body or a
part of human body.
• This product is not intended for use as explosion-proof
product. Do not use this product in a hazardous location and/
or potentially explosive atmosphere.
Safety precautions on laser product
• This product employs a semiconductor laser for its light
source.
• Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous
radiation exposure.
• Follow the instructions mentioned in this manual. Otherwise,
injury to the human body (eyes and skin) may result.
•
Do not disassemble this product. Laser emission from this
product is not automatically stopped when it is disassembled.
Precautions on class /2 laser products
•
Do not stare into the beam.
•
Do not direct the beam at other people or into areas where
other people unconnected with the laser work might be
present.
• Be careful of the path of the laser beam.
If there is a danger that the operator may be exposed to the
laser beam reflected by specular or diffuse reflection, block
the beam by installing an enclosure with the appropriate
reflectance.
• Install the products so that the path of the laser beam is not
as the same height as that of human eye.
Precaution on class 1 laser products
• Do not stare into the beam.
Item Description
Model IA-030 IA-065/100
Wavelength 655 nm 655 nm
FDA(CDRH)
Part1040.10
Laser Class Class 1 Laser Product * Class Laser Product
Output 220 μW 560 μW
IEC 60825-1
Laser Class Class 1 Laser Product Class 2 Laser Product
Output 220 μW 560 μW
DANGER
WARNING
CAUTION
NOTICE
Important
Point
Reference
WARNING
CAUTION
IA
IA-030
Laser radiation
emission indicator
Sensor amplifier Sensor head
IA-065/100
Aperture label
Aperture label
Laser
transmitter
FDA (CDRH)
warning label (Class )
z Aperture label
z IEC warning/explanatory label (CLASS 2)
z FDA (CDRH) warning label (CLASS )
The FDA (CDRH) warning labels are only affixed to Class laser products.
96M11668