KEYENCE IV Series - Manual (Page 103)

4-35 - IV Series User's Manual (Monitor) -
z „
Setting a search region
When a range of the search region is to be specified,
perform the following procedures.
1
Tap the [Search Region] button.
The selection screen for a search region opens.
2
Tap the [Partial] button.
The editing screen for a search region opens.
3
Set a tool window indicates the search region.
Search region
y For details of editing the tool window, refer to
“Editing the tool window” (Page 3-15).
y The search region cannot be rotated.
4
After the setting is completed, tap the [OK]
button.
The system returns to the screen to set [Window
Shape] and [Search Region].
z „
Settings for disabling outlines
Perform the following procedures to delete an
unnecessary extracted outline in the tool window.
1
Tap the [Fine Tune Outline] button.
The Settings Navigator guide opens.
Tap the [OK] button.
2
Specify an outline which detection is not
needed by tracing it with stylus.
The specified outline changes from green to yellow.
The outline that the
outline extraction has
disabled (yellow)
y The eraser width (light/medium/heavy) of the
pen when tracing an outline can be switched
via [Eraser Width].
y The [Undo] button is applicable up to 5 times.
3
After the setting is completed, tap the [OK]
button.
The system returns to the main screen for the
Outline tool settings.
Outline tool Color Area/Area tool Position Adjustment tool Extended functions
1. Image Optimization 2. Master Registration 3. Tool Settings 4. Output Assignment
4
Settings Navigator (Setting the Judgment Condition)