KEYENCE IV Series - Manual (Page 86)

4-18 - IV Series User's Manual (Monitor) -
Advanced Brightness Adjustment
1
Display extended functions menu for the
Image Optimization.
“Display Method of Extended Functions Menus”
(Page 4-66)
2
Tap the [Advanced Brightness Adjustment]
button.
The screen to adjust brightness opens.
3
Set brightness and an imaging mode.
According to the brightness and imaging mode,
the exposure time will be calculated automatically.
Exposure time
y For the details of settings with the slider or
by inputting a value, refer to “Editing the
value with the slider” (Page 3-14).
y By tapping the [Auto] button, a light intensity,
an exposure time and an imaging mode can
be adjusted automatically.
4
After the setting is completed,
tap the [OK] button.
The system returns to the main screen for the
Image Optimization.
When the master image is registered and
settings other than Trigger Options and
imaging area are changed, the confirmation
message that recommends you to re-register
the master image appears. Tap the [OK]
button and re-register the master image.
“2. Master Registration (Registering an Image
as a Reference for Judgment)” (Page 4-20)
Lighting
1
Display extended functions menu for the
Image Optimization.
“Display Method of Extended Functions Menus”
(Page 4-66)
2
Tap the [Lighting] button.
3
Select the lighting mode from
[OFF]/[Flash]/[Continuous].
4
After the setting is completed,
tap the [OK] button.
The system returns to the main screen for the
Image Optimization.
y If the lighting mode is changed, re-register
the master image and re-set the tool.
Otherwise a correct judgment may not be
possible.
y When [Continuous] has been selected,
the light goes off for approximately 0.3 ms
right before imaging.
Trigger Options Auto Brightness Adjustment Focus Adjustment Extended functions
1. Image Optimization 2. Master Registration 3. Tool Settings 4. Output Assignment
4
Settings Navigator (Setting the Judgment Condition)