KEYENCE IV Series - Manual (Page 258)

A-2 - IV Series User's Manual (Monitor) -
A
Status Table
Status table
Status
Monitor
screen
type
Sensor operation indicator light Input Output
PWR/ERR OUT TRIG
External
trigger
Switch
programs
External
master image
registration
Clear
Error
BUSY
Total Status / Total status NG /
Each tool / Each logic /
Pos.Adj. *1
RUN Error
Running *2
Waiting for a trigger
RUN
Lighting
(green)
*3
OFF ¡ ¡ ¡
Í
OFF
*4
ON OFF
Judgment processing *5
*6
*7 *8
ON Switching programs
*9 OFF
*10 *11
*12
Registering the external master image *11 *10
Setting
Limit Adjustment TEST
Blink
(green)
OFF *5
¡
Н Н Н
Same
as while
running
OFF
OFF
OFF
Trigger Options, Master Registration, etc.
LIVE
Focus adjustment (MF) OFF *14 OFF
Automatically adjusting the brightness
Automatically adjusting the focus (AF)
Blink
(green)
OFF
*13
Í
*13
Setup Adjustment
-
*15 OFF
I/O Monitor
OFF
*16 ← ← ← ← ← ←
Others Н Н Н Н OFF OFF OFF
Error
Trigger error
Running RUN
Blink (red) Same as normal Same as normal ¡ Same as normal
ON
Setting LIVE
External master registration error
- System error
Lighting
(red)
OFF OFF Н Н Н Н
OFF OFF
OFF
Startup memory readout error *17 *17 *17
Status Table
¡ /Í indicates enable/disable of the input.
ON/OFF indicates the following status. The operation differs according to the output setting (N.O./N.C).
y For N.O. ON : Indicates ON for an NPN or PNP open collector output.
OFF : Indicates OFF for an NPN or PNP open collector output.
y For N.C. ON : Indicates OFF for an NPN or PNP open collector output.
OFF : Indicates ON for an NPN or PNP open collector output.
*1 Turns ON if the judgment is OK. Turns OFF if it is NG.
When the total status result is OK, the total status output turns ON.
When the total status result is NG, the total status NG output turns ON.
The total status conditions can be selected from [All Tools OK], [Any Tool OK] and [Logic 1] to [Logic 4].
“Total Status Conditions” (Page 4-65)
When the position adjustment is NG, the status of each tool becomes NG.
*2 The sensor continues running even during the operation of the [Monitor Settings/Sensor Image
History/USB Memory] screen in the run screen.
*3 Indicates the overall status result of the previous judgment process.
OK: Lighting (green), NG: Lighting (red)
*4 Outputs the status result of the previous judgment process.
*5 Lights (one-shot) by linking to the trigger issuance (external/internal).
When a trigger delay has been set, it lights before the delay.